Category Archive Throat swab

ByAdminsoft

What is the difference between a nasal swab and a throat swab

What is the difference between a nasal swab and a throat swab

The accuracy of detecting nasal swabs and throat swabs is usually the same. The main difference lies in the sampling method and sampling site. For nasal swabs, the nasal swab is mainly use to dip the secretions on the surface of the nasal mucosa inside the nasal cavity for detection. In fact, pharyngeal swabs are collect from the oropharynx for testing to determine whether the sampler is infect with the new coronavirus.

Under standardized operations, throat swabs and nasal swabs are two methods for collecting specimens. There is no difference in essence. Both are for collecting specimens from the pharynx. The difference is that one enters from the oral cavity, and the other is from the mouth. Enter the nasal cavity.

For throat swabs, the sampler can see the sample site, but it may cause nausea, vomiting, and other reactions, and because the pharyngeal virus content is affect by diet, drinking, and swallowing actions, it will affect it to a certain extent Throat swab detection rate.

When collecting nasal swab specimens, the swab will enter the nasal cavity. If the operation is standardize, it will cause less irritation to the mucous membrane. However, because the pharynx sampling position cannot be seen, the main reliance is on the sensory resistance of the hand. For those who require more technology, the tools use are more complex. If the operation is improper, it will cause some irritation to the nasal mucosa. Therefore, it is not recommended to do nasal swabs for patients with sinusitis and allergic rhinitis to avoid damage to the nasal cavity.

What is the difference between a nasal swab and a throat swab

ByAdminsoft

How is a throat swab used

How is a throat swab used

A throat swab is a throat swab that is used to check for lesions and take a throat sampling. It can be said to be a detection method to understand the patient’s condition, oral mucosa, and pharynx infection. Because the pharynx is affected by infections caused by external bacteria when the body’s body or local resistance is reduced, the doctor needs to collect some cells or viruses for observation when we seek medical treatment, so as to understand the patient’s disease. Illness.

The advantages of throat swabs:

1. A release rate of more than 90% for the collected samples;

2. In fact, one hand operation, no pollution, easy to use;

3. Automobile innovation, independent packaging;

4. Unique craftsmanship increases the comfort of the collected person;

5. Under normal temperature conditions, the samples can be stored for 12 months;

6. Pharyngeal Swab The swab set is a combination of swab and preservation solution, which can be used to collect samples once per person.

In fact, throat swabs are divided into oropharyngeal swabs and nasopharyngeal swabs. Nasopharyngeal swabs are also called nasal swabs and nasal swabs, but oropharyngeal swabs and oral swabs are not the same.

Throat sampling method

1. First, check personal information with the subject.

2. Then tear off the outer packaging of the sample and take out the sample;

3. Let the examinee open his mouth to make an ah sound to expose the mouthpiece, and if necessary, use a tongue depressor to press down the tongue (lightly press the front 2/3 of the tongue and the back 1/3);

4. Take out the swab, gently and quickly wipe the bilateral pharyngeal tonsils and pharyngeal wall 3 times, and put the swab head into the preservation solution.

5. The bottle mouth is firmly buckled and folded and stored at a later stage, the rear end will be removed, and the tight tube will be tightened (cap off the test cap),

6. Finally, check the user’s name again;

7. And put it in a sealed bag, and put it in the transfer box, and then quickly check the sample in the laboratory.

ByAdminsoft

Introduction and function of throat swab

Introduction and function of throat swab

Throat swab is a swab used to check whether the throat is diseased and for throat sampling. It can be said to be a detection method to understand the patient’s condition,

oral mucosa and pharynx infection. Because the pharynx is more susceptible to disease caused by infection caused by external bacteria when the body’s body or local resistance is reduced,

so when we seek medical treatment,

doctors need to collect some cells or viruses for observation to understand the patient’s disease Happening.

In appearance, our throat swab should be straight, neat, smooth, uniform in color,

free of burrs, mildew, scars, scratches, cracks and other defects. As a qualified swab, it should be very good.

Clean, odorless, and soft to the touch, without maculas, stains, or foreign objects.

In terms of performance, the swab should be able to withstand 4N static pressure perpendicular to the axial direction for 15 seconds without permanent deformation or breaking.

The breaking force of the depression at the sampling tip should be no less than 2N.

When using a throat swab, be aware that the flocking has a very light tingling sensation on the skin,

so before use, people who are allergic to flocking should first place the swab

on the sampling part and gently perform an allergy test Later,

it is used for sampling.

Introduction and function of throat swab

ByAdminsoft

Throat swabs are generally used to check for what disease

Throat swabs are generally use to check for what disease

If we are sick, it is very important to seek medical treatment in time. When we arrive at the hospital, in addition to listening to our description of the medical history, the doctor also needs to perform corresponding examinations. Only through medical history consultation and laboratory examinations can we diagnose the disease and its medication plan.

When we go to the hospital for physical examination, the items include blood test, urine test, stool test, etc. What we are going to mention today is a test call throat swab culture. I believe that this kind of test is familiar to everyone this year, and everyone should have been expose to it. So what kind of disease do throat swabs usually check? Next, I will give you a specific description of this issue.

Throat swab inspection is to take secretions from the throat, conduct bacterial culture, and then conduct a drug susceptibility test based on the infected bacteria. The results of the throat swab examination can provide an important basis for the accurate medication of the clinician.

Throat swabs are generally used to check upper respiratory diseases, such as acute suppurative tonsillitis, acute pharyngitis, diphtheria and other respiratory diseases.

After taking out the secretions and performing corresponding examinations,

it can be known which bacteria are the main infections of the patient. Finally, the doctor will use the susceptibility results of the cultur bacteria as an important basis for clinical medication.

Note that when undergoing a throat swab examination, there may be mild neural reflexes, so everyone must hold back.

ByAdminsoft

Introduction and characteristics of sterile swabs

Introduction and characteristics of sterile swabs

Sterile swabs, full-name disposable sterile sampling swabs, not only for bacteriological sample processing, COVID-19, nasal swab sampling, throat swab sampling, oral swab sampling, but also for virus cell culture , DFA detection, rapid direct detection, enzyme immunoassay, polymerase chain reaction based on molecular diagnostic tests and forensic identification are ideal choices.It can also be use for throat sampling of respiratory viruses such as influenza, swine flu, avian flu, hand, foot and mouth.

Scope of application

The best tool for skin surface sampling, DNA collection, oral cells, physical surfaces, microorganisms, bacteria and viruses testing and sampling. The disposable aseptic sampling swab CY-98000, with a break point of 3cm, is superior in that it is better than traditional swabs, The collection and release volumes are large and can be broken. The traditional swabs need to be cut by the laboratory staff with scissors, which is too troublesome and too time-consuming. Our new flocking disposable sampling swab greatly reduces the time cost.

Features

  1. It not only has excellent water absorption capacity, but also can increase the number of specimens collected on the watch from 20% of the traditional sampling swab to 60%.
  2. The release rate of the collecte specimens exceeds 90%, thus ensuring the high reliability of the results.
  3. Different preservation solutions are selecte for different types of specimens.
  4. The unique easy-to-break design on the plastic rod is not only convenient for transporting specimens, but also particularly suitable for preservation
  5. We not only use ethylene oxide for sterilization, but also for irradiation sterilization, but also individually packaged.

DNA aseptic flocking swabs are suitable for humans and animals, and have advantages over other DNA test samples in design. Its unique test sample matrix and rapid release interface are more conducive to efficient cell collection and maximize DNA yield. The test piece has been sterilize with ethylene oxide and passed the test for human DNA contamination.

Introduction and characteristics of sterile swabs

ByAdminsoft

Which of the following diseases can be used for throat swab collection?

Which of the following diseases can be used for throat swab collection?

We are no strangers to throat swabs, but do you know which diseases it applies to? Take a look.

Generally, the pharyngeal isthmus has beneficial bacteria:

In general, the shaping of the pharyngeal isthmus requires all normal and beneficial bacteria in the oral cavity without the growth and development of pathogenic bacteria. The germs in the throat are all from the outside, and they do not get sick under normal conditions, but infections and other external factors can cause illnesses such as infections under the body or part of the immune system. Therefore, bacterial culture of throat swabs can isolate pathogenic bacteria, which is conducive to the diagnosis of diphtheria, purulent tonsillitis and acute pharyngitis.

What diseases can throat swab collection apply to?

Pharyngeal swabs are often use clinically to check bacterial or fungal inflammation of the throat, such as chronic pharyngitis, mycoplasma infection, candidal pharyngitis, diphtheria, suppurative tonsillitis, and acute pharyngitis.

Pharyngeal swabs are mainly use for bacterial culture to identify the pathogens of the above diseases. When the patient has repeated pharyngeal pain, pharyngeal discomfort, itching, painful swallowing and other symptoms.

Clinical manifestations:

Patients will experience repeated throat pain, pharyngeal discomfort, itching, painful swallowing. In severe cases, they will have slow onset, headache, fatigue, fever, cough, and a small amount of sticky sputum. Sometimes they will continue to have a high fever or even loss of appetite. symptom.

If pathogenic bacteria are detecte in the throat swab secretion, it is an infection:

When pathogenic bacteria are detecte in sputum and throat swab secretions, it is regard as a respiratory infection. Cooperate with other inspections (such as X-ray fluoroscopy, B-ultrasound, etc.) to confirm the location of the respiratory system infection. Common pathogens for respiratory infections include: Staphylococcus, Pneumococcus, Haemophilus influenzae, Klebsiella pneumoniae, Staphylococcus, Streptococcus infection, Pseudomonas aeruginosa, Escherichia coli, etc.
If tuberculosis is shaped, it is tuberculosis. If you create a yeast-like yeast, you should consider whether the antibiotics are not use well or too much during the infection period. The antibiotics should be stop immediately and replace with antifungal drugs, such as amphotericin B, griseofulvin, clotrimazole suppository, etc.

Operation method of throat swab:

① Check the doctor’s order and be prepare.

②. Ask the patient to rinse his mouth with clean water, then let the patient open his mouth to make an “ah” sound, and use a tongue depressor if necessary.

③. Take out the disposable sampling swab, gently and quickly wipe the two palatal arches, tonsils and posterior pharynx three times.

④ Put the swab head vertically to avoid contamination of the tube wall, forcefully break off the tail of the swab at the mouth of the sampling tube, discard the tail, tighten and cover the tube cap (strictly perform aseptic operation)

⑤ After sampling, check the patient’s name again.

⑥. Indicate the retention time of the specimen and submit it for inspection in time.

Points to note:

①. When putting the swab into the tube, it should be place vertically, not to wipe it to the bottle mouth to avoid contamination. When placing it in the transfer box, it should be place vertically to avoid leakage.

② It is best to send/sent to the laboratory for inspection on the day of sampling.

③. Appropriate specimens must be consistent with the inspection form before inspection. The appearance of the sampling tube must be clear and well-known and basic information. Specimens without basic information cannot be tested; specimens submitted for inspection must be submitted (or electronically submitted in advance). , Submit inspection form and other materials. The submitted materials should be ensured not to be contaminat and not to be put together with the specimen.

④. In order to prevent sectioning when sampling, it should be avoide within 2 hours after the patient has eaten. The collection action is gentle, stable and agile to prevent discomfort to the patient.

⑤. The throat swab should not touch other parts during the collection process to ensure the accuracy of the remaining specimens.

⑥. When you decide to do a throat swab, please do not use antibacterial drugs.

⑦. The depth of throat swab collection and the length of mucosal contact time. When collecting throat swabs, if the subject’s vomiting reaction is relatively large, the sampling time is not enough or the inferior quality swabs are use, which may cause false negatives and delay treatment.

ByAdminsoft

What are the benefits of flocking swabs?

What are the benefits of flocking swabs?

We all know that flocked swabs can be used to collect samples. We are a leader in the field of medical swabs,

Do you know the benefits of flocking swabs?

(1) Flocking swabs are harmless to organisms, and they can increase the collection and release of specimens as much as possible;

(2) A large number of clinical trials have shown that, compared with ordinary sterile cotton swabs, nylon flocked cotton swabs not only have better collection and transportation effects for clinical microbial specimens, but also for those specimens that cannot be submitted for inspection in time and have been placed for too long.

What are the benefits of huachenyang’s Flocking swabs?

First of all, Huachenyang’s swab not only uses an international medical paper-plastic bag made of medical dialysis paper,

but also an independent package in a large box, which is particularly convenient to use.
Secondly, our swabs can also choose different preservation solutions and sampling tubes for different types of specimens (for example, bacteria, viruses, mycoplasma or chlamydia, etc.).
Furthermore, our swab adopts unique electrostatic spray implantation nylon fiber technology to increase the collection and release of specimens.
Then our fluffy swab can collect more target analytes, and not only has no specimen residues, but also speeds up specimen processing.

ByAdminsoft

What material is forbidden for throat swab?

What material is forbidden for throat swab?

We all know that the material of medical swabs has always been the focus of attention. After all, medical swabs are directly in contact with the skin. It’s OK to contact the skin with alcohol for disinfection. It’s OK. But what about those that directly contact the organs? For example, the throat swab we are most familiar with during the epidemic.

We know that the throat swab is in direct contact with the sampling site, and the material of the sampling head is closely relate to the subsequent detection.

What kind of material should be use for sampling swab head?

The sampling swab head should be make of PE synthetic fiber or artificial fiber. Calcium alginate sponge or wooden stick swab (including bamboo stick) should not be use. Cotton products should not be use in the head of swab, because the fiber of cotton has strong adsorption of protein, and it is not easy to elute into the subsequent preservation solution; while the wood stick or bamboo stick containing calcium alginate and wood components is broke and soake in preservation Protein can also be adsorb in the solution and even inhibit the subsequent PCR reaction.

What material can’t be use for sampling swabs? Why?

It is recommend to use synthetic fibers such as PE fiber, polyester fiber and polypropylene fiber to make swab head. Natural fibers such as cotton are not recommend.

Do not use calcium alginate sponge for throat swab material!

Neither calcium alginate additive should be add in the cotton swab handle material, nor the use of wooden stick or bamboo stick is recommend.In a word, the sampling swab should ensure the sampling amount and release amount, and the selecte material should not have substances that affect the subsequent detection.

What material is forbid for throat swab.

ByAdminsoft

What to use a flocking sampling swab?

What to use a flocking sampling swab?

Maybe you have such a question in your mind, why use flocking sampling swabs? After reading this article, you may know the answer

Reasons for using flocking swabs:

In our traditional fiber swabs, the sample is not only intercepted by the fiber mass gap, which makes the sample permeate, dilute and intercept in the fiber, but also slows down the collection and release speed.

Nylon flocking swab not only has good sample collection and release capacity, but also has a release rate of more than 80%.

Generally speaking, the sampling time of flocking swabs is 3-5 seconds, while that of cotton swabs is 15-120 seconds, or even longer. This in the diagnosis process, caused serious pressure on the staff. Only faster sample extraction can complete the collection and analysis more efficiently.

The characteristics of huachenyang flocking swabs were as follows

(1) The swab was make by spraying dense nylon fiber technology.

(2) According to the analysis items, there are soft or brush like swabs, which have reach the maximum collection amount.

(3) Disposable sterile injection swab with break point.

(4) Flocking swab technology can improve the adsorption / release amount of samples and improve the sensitivity of analysis

(5) No sample rejection indicates that the specimen can be delivere faster and less.

(the upright nylon fiber is like a soft brush, which can not only collect more cell samples.

Moreover, the capillary effect between nylon fibers enhances the bearing capacity of water-based samples.

Moreover, the samples are concentrate on the surface of the swab, which is easier to elute.

More samples can be adsorbe by nylon swabs.)

What to use a flocking sampling swab?

ByAdminsoft

Methods: virus swab specimens were collected

Methods: virus swab specimens were collecte

We all know that the collection method of virus swab specimen is basically to use the swab to sample the infecte place or part of the virus, and then put it into the virus sampling tube containing preservation solution without touching other places, so as to conduct virus detection later. So basically, the soup is change without changing the dressing.

For example, throat swabs and nasal swabs were use to detect new coronavirus

Methods: throat swabs were collected

Inform the patient of the purpose of examination, collection method and collection time. It is best to collect specimens before using antibiotics.

Objective:

To study the clinical effect of the method

Secretions were collecte from pharynx or tonsil for bacterial culture or virus isolation to assist in clinical diagnosis and treatment.

Prepare sampling supplies:

Disposable sampling swab, virus sampling tube, tongue depressor and biological bag

Operation method:

(1) Ask the patient to sit down, tilt his head back, open his mouth and make a “ah ~” sound

(2) The patient’s tongue was fix with a tongue depressor, and a disposable swab was used to cross the tongue base to the posterior pharyngeal wall, tonsil recess and lateral wall;

(3) Repeatedly wipe 3-5 times to collect mucous membrane cells or sputum

(4) . gently remove the swab to avoid touching the tongue, the suspension, the oral mucosa and saliva

(5) Put the swab into the virus sampling tube gently and vertically. Break off the tail of the swab, and leave the tail of the swab so that it is completely place in the tube. Be careful that the swab does not touch the wall of the tube.

(6) . tighten the cap, mark it, and seal it in the biosafety bag.

(7) It should be sent to the laboratory for testing in time. If it can not be sent for inspection in time, it should be store at low temperature.

Methods: nasal swabs were collecte

(1) Ask the patient to sit down with his head slightly back and remove the secretion from the front nostril first;

(2) . measure the distance from nostril to ear base with swab and mark with finger

(3) . gently insert the swab into the nostril until it is marke or stopp when there is obstruction. Let the swab stay in the nose for 15-30 seconds, and then rotate it gently three times.

(4) . slowly pull out the nasal swab and quickly put it into the virus sampling tube. Then break the swab, leave its tail and place it completely in the tube.

(5) . tighten the cap, mark it, and seal it in the biosafety bag.

(6) If it is necessary to collect from two nostrils, one swab should be used.

(7) It should be sent to the laboratory for testing in time. If it can not be sent for inspection in time, it should be store at low temperature.