Tag Archive sampling swab


What to use a flocking sampling swab?

What to use a flocking sampling swab?

Maybe you have such a question in your mind, why use flocking sampling swabs? After reading this article, you may know the answer

Reasons for using flocking swabs:

In our traditional fiber swabs, the sample is not only intercepted by the fiber mass gap, which makes the sample permeate, dilute and intercept in the fiber, but also slows down the collection and release speed.

Nylon flocking swab not only has good sample collection and release capacity, but also has a release rate of more than 80%.

Generally speaking, the sampling time of flocking swabs is 3-5 seconds, while that of cotton swabs is 15-120 seconds, or even longer. This in the diagnosis process, caused serious pressure on the staff. Only faster sample extraction can complete the collection and analysis more efficiently.

The characteristics of huachenyang flocking swabs were as follows

(1) The swab was make by spraying dense nylon fiber technology.

(2) According to the analysis items, there are soft or brush like swabs, which have reach the maximum collection amount.

(3) Disposable sterile injection swab with break point.

(4) Flocking swab technology can improve the adsorption / release amount of samples and improve the sensitivity of analysis

(5) No sample rejection indicates that the specimen can be delivere faster and less.

(the upright nylon fiber is like a soft brush, which can not only collect more cell samples.

Moreover, the capillary effect between nylon fibers enhances the bearing capacity of water-based samples.

Moreover, the samples are concentrate on the surface of the swab, which is easier to elute.

More samples can be adsorbe by nylon swabs.)

What to use a flocking sampling swab?