Introduction of Disposable Virus Sampling Tube

Introduction of Disposable Virus Sampling Tube

Product name: One-time use virus sampling tube

Specification model

CY-F005-10, CY-F005-20, CY-F005-30

Packing specification

20 servings/box

expected usage

Used for sample collection, transportation and storage, etc.

Principle of Inspection

On the basis of Hank’s, potassium chloride, magnesium chloride, calcium chloride and other substances are add to provide the necessary nutrient ions for pathogenic bacteria to make it more specific, and to store longer, and to preserve the form of pathogenic bacteria to a greater extent Integrity, improve the extraction rate of pathogenic bacteria.

Structure and composition

A combination of cotton swabs and transport medium.

Sample requirements

In fact, the collect specimens should be send to the laboratory within 48 hours at 2-8°C. But if it cannot be send to the laboratory within 48 hours, it should be store at -70°C or lower. Specimens should be inoculate and separate as soon as possible after they are send to the laboratory, and can be store at 2-8°C after inoculation and separation within 48 hours. If it is not inoculate and separate in time, it should be store at -70℃ or lower.

Storage conditions and expiry date

In fact, the product should be store in a clean, hygienic, dry and ventilated environment.

Therefore, the temperature is 5℃~35℃, the relative humidity is less than 85% RH, and the product shelf life: 12 months.

Instructions

1. Before sampling, mark relevant information on the label of the sampling tube.

2. So use the corresponding sampling swab for sampling.

3. After sampling, quickly put the cotton swab into the sampling tube, break off the part higher than the sampling tube, and tighten the tube cap.

The specific sampling method is as follows:

1. Nasal swab: Gently insert the sampling head into the nasal palate in the nasal passage, leave it for a while, slowly turn to exit, immerse the collected specimen in the sampling solution, break the extra part and discard it, and tighten the sampling tube cover.

2. Pharyngeal swab: actually use the sampling head to wipe the bilateral pharyngeal tonsils and back wall of the pharynx, immerse the collected specimen in the sampling solution, break up the excess part and discard it, and then tighten the cap of the sampling tube.

3. Sampling of mycoplasma, chlamydia, and ureaplasma specimens: male: insert the sampling head into the urethra about 2cm and rotate it, stay for a while and then exit, immerse the collected specimen in the sampling solution. Female: Wipe off the cervical mucus, insert the sampling head into the cervical canal 1-2cm for sampling, immerse the collected specimen in the sampling solution, break the extra part and discard it, and tighten the sampling tube cover.

Precautions

1. After the pathogenic bacteria specimens are collected, the disposable sampling cotton swab should be completely inserted into the preservation solution to maximize the retention of the pathogenic bacteria.

2. The collected specimens must be fresh and sent for inspection in time to avoid the death of pathogenic bacteria.

3. In fact, it is prohibited to use products with damaged packaging and expiry date to prevent contamination.

4. This single-use virus sampling tube is used for in vitro diagnosis and cannot be used inside or outside humans or animals. If swallowed, it may cause serious accidents; in fact, it irritates the eyes and skin. If splashed into eyes accidentally, please rinse with water.

Introduction of Disposable Virus Sampling Tube